5G8-500OL
This is the first 5.8G solution that supports both the Fatshark/ImmersionRC (airwave/NexwaveRF) 7-channel and Chinese-brand 8-channel Video Frequencies.
The latest 500mw version with improved power solution. Supports 5V and 12V (same as input voltage) output to cameras now
Specifications
Frequency: 5.8G wide-band FM video/audio tx
Power: 500MW/26.5dBm
Channels: 2 modes:5740-5860MHz(7-channel) / 5705-5925MHz(8channel)
15 channels total
Weight: 17g only
PAL/NTSC supported
Sterieo audio: L/R audio channe;
Input Voltage:7-16v
Current: 220ma@12v
antenna connector: SMA
The latest Rx with improved power solution supports wide range power input from 6-16v, so 2-4 cell lipo are supported to power the combo.
Specifications:
weight：116g
size：80*60*20mm
wide range power input： 7V-16V
Frequency band：5740-5860MHz （Fatshark/ImmersionRC） / 5705-5945MHz
15 channels total
PAL/NTSC supported
Sterieo audio: L/R audio channe;
antenna connector: SMA
This is Plug and play 5G8 FPV Combo with OSD and LCD Screen. If you fly your RC Aircraft around you, and in the Line of Sight (LOS) of Video Receiver and its antennas, you can easily get 1km to 2km clear video reception. 5.8Ghz is does not perform very well around obstacles so keep that in mind when flying your RC Aircraft with this combo. You will experience video glitches around obstacles like bridges and buildings that block the LOS between Video Tx and Rx completely.
Your purchase includes:
- Mini Day Night Camera
- 15 Channel 5.8ghz 500mw Video Transmitter
- 15 Channel Video Receiver
- Hornet OSD with GPS and 100A Current Sensor
- Related AV Cables
- Super bright 7inch LCD Screen with shades
- Stock Omni Antennas
Day Night Mini FPV Camera Specs:
- Sensor: Single chip 1/3 CMOS
- SYSTEM: NTSC & PAL
- NUMBER OF PIXEL NTSC:656(H)×492(V);PAL:786(H)×576(V)
- IMAGE SIGNAL PROCESS: Digital Signal Processing System
- SENSOR DIMENSION: 4.75mm(H)×3.55mm(V)
- HORIZONTAL RESOLUTION: 520TV Lines
- SCANNING SYSTEM: 2:1 Interlace
- SENSITIVITY: 0.008Lux/F1.2
- LENS & VIEW ANGLE: 0.5mm F2.0 / 90 °
- S/N RATIO: 48dB
- VIDEO OUT: 1.0V p-p/75ohm
- SIZE (L x W x H): 22.5mm x 11.5mmx 11.5mm
- WEIGHT: 1g
- Working voltage: 3.6-24 V
Hornet OSD
This is one great and proven On Screen Display (Live Flight Data Telemetry OSD) device that I (AliShanMao) has used over couple of years and never encountered a single issue. Very easy to use, totally plug and play OSD that delivers superb and plenty of flight data for FPV pilots. It also offers easy switchable screens even during flight to display both few and basic flight telemetry or full Flight telemetry instantly using your Radio Control
For more details download and read the user manual here. Hornet OSD User Manual
FPV LCD Screen
The first monitor designed for FPV and AP application, HD highlight, no blue screen when losing signal.
Optional 16:9 and 4:3 display mode, support definitions as high as 800*480.
LCD Screen Specs:
- Screen size: 7-inch TFTLED LCD screen
- Physics Resolution: 800 × 480
- Brightness :400-450cd / m - the highest brightness
- Contrast Ratio: 500:1
- Viewing Angle: 140 ° / 110 ° (horizontal / vertical)
- Input Voltage: DC 7-12V (red line)
- Input Signal: one composite video (yellow), all the way audio (white) (RCA Lotus mother head interface)
- Power consumption: ≤ 8W
- Audio output: ≤ 1W
- Dimensions (length and width of the deep): 185.5 × 122 × 32.5mm
- Weight: 450g
If you are still confused and can’t decide which FPV combo to buy, drop us a line here. We will guide you to make a perfect choice of FPV combo or design a custom one for you from scratch.