1G2-OL (with OSD and LCD)
This is Plug and play 1.2G/1.3G Video Frequency FPV Combo with Hornet OSD and LCD Screen. This is a proven combo that AliShanMao personally uses for medium to long range FPV flights. In its stock state as it’s offered here, this combo will offer a clear glitch free video for 1km to 3km. Unlike 5.8Ghz video Frequency, this combo offers a very good video reception even around obstacles. So feel free to fly and roam the forests and trees and around land mark building. To get a good 10km or more range from the same combo, (Sold Separately) just add a 14dbi 1.2G/1.3Gh Patch antenna to your Video Receiver and see the same FPV combo offering you greater video range for your long range FPV adventures.
It’s a very 2.4ghz Radio Friendly system. Just use the supplied LowPass filter. For Futaba FASST 2.4ghz radios, you do not even need the low pass filter, but we still recommend you to use it on video transmitter.
Your purchase includes:
- Mini Day Night Camera
- 1.3ghz 800mw 12 Channel Digital Video Transmitter and Video Receiver combo
- Hornet OSD, GPS and 100A Current Sensor
- Related AV Cables
- LowPass filter
- Super Bright 7inch LCD screen with Shades
- Stock Omni Antennas
Day Night Mini FPV Camera Specs:
- Sensor: Single chip 1/3 CMOS
- SYSTEM: NTSC & PAL
- NUMBER OF PIXEL NTSC:656(H)×492(V);PAL:786(H)×576(V)
- IMAGE SIGNAL PROCESS: Digital Signal Processing System
- SENSOR DIMENSION: 4.75mm(H)×3.55mm(V)
- HORIZONTAL RESOLUTION: 520TV Lines
- SCANNING SYSTEM: 2:1 Interlace
- SENSITIVITY: 0.008Lux/F1.2
- LENS & VIEW ANGLE: 0.5mm F2.0 / 90 °
- S/N RATIO: 48dB
- VIDEO OUT: 1.0V p-p/75ohm
- SIZE (L x W x H): 22.5mm x 11.5mmx 11.5mm
- WEIGHT: 1g
- Working voltage: 3.6-24 V
Hornet OSD
This is one great and proven On Screen Display (Live Flight Data Telemetry OSD) device that I (AliShanMao) has used over couple of years and never encountered a single issue. Very easy to use, totally plug and play OSD that delivers superb and plenty of flight data for FPV pilots. It also offers easy switchable screens even during flight to display both few and basic flight telemetry or full Flight telemetry instantly using your Radio Control
For more details download and read the user manual here. Hornet OSD User Manual
FPV LCD Screen
The first monitor designed for FPV and AP application, HD highlight, no blue screen when losing signal.
Optional 16:9 and 4:3 display mode, support definitions as high as 800*480.
LCD Screen Specs:
- Screen size: 7-inch TFTLED LCD screen
- Physics Resolution: 800 × 480
- Brightness :400-450cd / m - the highest brightness
- Contrast Ratio: 500:1
- Viewing Angle: 140 ° / 110 ° (horizontal / vertical)
- Input Voltage: DC 7-12V (red line)
- Input Signal: one composite video (yellow), all the way audio (white) (RCA Lotus mother head interface)
- Power consumption: ≤ 8W
- Audio output: ≤ 1W
- Dimensions (length and width of the deep): 185.5 × 122 × 32.5mm
- Weight: 450g
Important point to consider
If you own a GoPro 3 already, why not get this combo GoPro 3 ready and use your GoPro 3 as FPV Camera and at the same times shoot HD footage. This will save you cost and weight of an FPV camera. Of course if you do not own a GoPro 3 camera yet, we can also supply these combos with GoPro 3 Black Edition Camera.
Check, Download and study this detailed OFM PNP FPV Combos Purchase Guide and purchase the right FPV Combo today.
And if you are still confused and can’t decide which FPV combo to buy, drop us a line here. We will guide you to make a perfect choice of FPV combo or design a custom one for you from scratch.
We also have FPV combos that are plug and play with GoPro 3 FPV Cameras. To order these contact us.
If you do not own Go Pro 3 Black Edition, its about time you go ahead get one of these awesome cameras together with our Plug and play FPV Systems. Check out same combos but with GoPro 3 Black Edition. To order these contact us